Ericsson LBI-39001 Instrukcja Operatora Strona 16

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 46
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 15
16
11. Install Cable 19D903880P12x from the PIM control concentrator panel at the IMC to the concentrator panel at the
PI. (See Figure 2 or Figure 3 herein for T1 or E1, respectively. This cable is the control link, and there is only one
cable to be installed.)
12. Install Cable 19D903880P12x from the PIM audio concentrator panel at the IMC to the concentrator panel at the PI.
(See Figure 2 or Figure 3 herein for T1 or E1, respectively. These cables are the audio link, and there are 2 to 4
cables to be installed.)
The following steps must be performed at the CEC/IMC Manager.
13. To set the number of slots:
a. Log in to the MOM PC
b. Select System Audio Configuration
c. Select TDM Bus and Slot Configuration
d. Select System Slot Configuration
e. Select Configure Slots
f. Select Site Slots
g. Scroll to the site for Jessica
h. Set the number of slots to the number of audio channels
i. Press Escape twice
j. Select Send Slots
k. The screen should display the message "Slot Allocation successfully sent to MOM controller"
l. Press Escape until reaching the main menu
14. To set the audio levels:
a. From the main menu select System Audio Configuration
b. Select Trunked Channel Configuration
c. Select Site ID
d. Pg Dn to Site ID field and enter the Jessica site number, then press Return
e. Enter the EDACS IMC configuration for the PIM input and output audio settings with these values
PIM Audio (T1 NEC MUX) Audio Out 0 dBm; Audio In -8 dBm.
PIM Audio (E1 ANT MUX) Audio Out -14 dBm; Audio In +4 dBm.
f. Press F7 to send values
g. The screen should display the message "Trunked Channel Configuration received by site <#>"
h. Press any key
i. Press F5 to save the values to disk
j. The screen should display the message "Trunked Channel Configuration Changed. Save to Disk?"
k. Select Yes
l. The screen should display the message "Site # Trunked Channel Configuration Data Saved To Disk!
--Press <Esc> to Continue--"
m. Press Escape until reaching the main menu
Przeglądanie stron 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Komentarze do niniejszej Instrukcji

Brak uwag